- The most affordable all-in-one automated all-grain brewing system!
- Mash grains and boil wort in a single vessel
- DigiBoil electric kettle automatically maintains mash temperatures with the digital controller
- Triple heating elements combine for 3500W of power
- Also available with optional DigiMash Pump Up Kit
DigiMash Essential Kit Includes:
- KL09577 False bottom and KL13642 eye bolt assembly
- KL09560 Malt pipe
- KL09553 Wire support
- KL29506 10mm Thick Malt pipe handle
- KL14243 Malt pipe bottom screen
65L DigiMash - Digital Turbo Boiler 3500watt + Malt Pipe Assembly
The DigiMash system represents the best value in electric all-grain brewing you'll find. With a 17-gallon DigiBoil electric kettle and the DigiMash stainless steel mashing accessory pack included, this is by far the most affordable way to get into electric all-grain brewing at the 10-gallon batch level. It may not have all the bells and whistles of the BrewZilla, but it does have everything you need to mash and boil all in one unit. Setting up and using the DigiMash couldn't be easier. Simply place the false bottom inside the kettle and install the malt pipe, fill with water and heat to your desired strike temperature, then add your grain and set your desired mash temperature on the digital controller. Once your mash is complete, lift up the malt pipe, drain the wort and sparge, then remove the malt pipe and proceed to boil.
If you're deciding between the DigiMash and the BrewZilla, there are a couple of key differences worth noting. One of our favorite features of the BrewZilla is the programmable mash steps and delayed start, which the DigiMash does not have. You can still step mash by simply raising the temperature manually on the controller, but the automatic steps are a convenient feature if you want to set it and forget it.
The other major difference between the two systems is that the BrewZilla features a built-in pump for recirculating the mash. Recirculation is a great way to improve mash efficiency, but it is far from required for a successful brew day. Using an external pump with the DigiMash is also an option, and one can be integrated for mash recirculation quite easily. Simply connect the ball valve to the inlet of your pump, and then connect the outlet of the pump to our Sparge Arm Assembly.
This model comes with the 65L DigiBoil, which has three built-in heating elements that run off a 220V plug. The elements are 2000w, 1000w and 500w for a combined 3500 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage all three elements to quickly go from steeping temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s).
DigiBoil Features:
- 304 stainless steel construction
- 65L total capacity
- Digital temperature control
- 240V
- AUD 15a Plug
- Triple heating element control (2000w, 1000w and 500w)
- Heating elements are concealed for easy cleaning
- 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2")
- Stamped-in volume markers (gallons & liters)
- Glass lid
- Temperature reads in °F or °C
- With elements turned off, hold both the +/- buttons to switch between °F or °C
- External Dimensions: 74" H x 50" W (including handles)
- Internal Dimensions: 51cm H x 40cm W
DigiMash Essential Kit Includes:
- KL07313 65L DigiBoil - Digital Turbo Boiler 3500watt
- KL09577 False bottom and KL13642 eye bolt assembly
- KL09560 Malt pipe
- KL09553 Wire support
- KL09683 Malt pipe handle
- KL14243 Malt pipe bottom screen