- -The most affordable all-in-one automated all-grain brewing system!
- -Mash grains and boil wort in a single vessel
- -DigiBoil electric kettle automatically maintains mash temperatures with the digital controller
- -Dual heating elements combine for 1500W of power
- -Also available with optional Recirculation Pump Kit!
DigiMash Stainless Steel Accessory Pack Includes:
- KL05531 False bottom and KL13642 Eye Bolt Assembly
- KL04817 Malt pipe
- KL10559 Wire support
- KL05548 Malt pipe handle
- KL14236 Malt pipe bottom screen
DigiMash Upgrade Kit for 35L DigiBoil
Turn your 35L DigiBoil into a DigiMash system!
This upgrade kit represents the best value in electric all-grain brewing you'll find. This is by far the most affordable way to get into electric all-grain brewing. It may not have all the bells and whistles of the BrewZilla, but it does have everything you need to mash and boil all in one unit. Setting up and using the DigiMash couldn't be easier. Simply place the false bottom inside the kettle and install the malt pipe, fill with water and heat to your desired strike temperature, then add your grain and set your desired mash temperature on the digital controller. Once your mash is complete, lift up the malt pipe, drain the wort and sparge, then remove the malt pipe and proceed to boil.
If you're deciding between the DigiMash and the BrewZilla, there are a couple of key differences worth noting. One of our favorite features of the BrewZilla is the programmable mash steps and delayed start, which the DigiMash does not have. You can still step mash by simply raising the temperature manually on the controller, but the automatic steps are a convenient feature if you want to set it and forget it.
The other major difference between the two systems is that the BrewZilla features a built-in pump for recirculating the mash. Recirculation is a great way to improve mash efficiency, but it is far from required for a successful brew day. Using an external pump with the DigiMash is also an option in our DigiMash Pump Up Kit.
This upgrade kit is designed for the 35L DigiBoil, which has two built-in heating elements that run off a 240V plug. One element is 1900w and the other is 500w for a combined 2400 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage both elements to quickly go from mash temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s).
DigiBoil 35L (sold separately) Features:
- -304 stainless steel construction
- -35L total capacity
- -Digital temperature control
- -240V / 10A power and plug (1.5m Cord)
- -Dual heating element control (1900w and 500w)
- -Heating elements are concealed for easy cleaning
- -304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2")
- -Stamped-in volume markers (gallons & liters)
- -Stainless lid
- -Temperature reads in °F or °C
- -With elements turned off, hold both +/- buttons to switch between °F or °C
- -Recommended max. grain bill - 8kg
- -External Dimensions: 29" H x 15" W (including handles)
- -Internal Dimensions: 19.5" H x 11.75" W
DigiMash Stainless Steel Accessory Pack Includes:
- KL05531 False bottom and KL13642 Eye Bolt Assembly
- KL04817 Malt pipe
- KL10559 Wire support
- KL29506 Malt pipe handle
- KL14236 Malt pipe bottom screen